Floors in the house
Don’t know where to invest money that you collect? Insert them into the repair of floors in your home or in your apartment. For floors in the house, we use a pinched board with a thickness of 3-5 centimeters. To work, you will need: wedges, hammer, nails and maybe small Bulgarian. Before laying the board, it is necessary to put and secure a vapor barrier film or a dense polyethylene film in two layers. The edges of the film must perform 10-15 centimeters above the floor. If it is impossible to put the film with a whole piece, it is necessary to put the pieces of peaks of 5-10 centimeters and makes them with a scotch.
The most important thing is exactly and correctly install the first board. It is best to do this with a cord stretched from the wall to the wall. This will help to avoid distortion. Krepim first board with nails so that they are hidden by plinth. The next board insert spikes in the groove of the first board and so on. If the spike in the groove does not climb, then remove it with the help of a grinder with a petal circle. Thus, score 5-6 boards.
Next to the beam score a bracket. Between the bracket and board we drive harvested wedges. It is necessary in order to remove the gaps between the boards. Between the gender boards and gaps should not be.
Last board we press with the assembly and attitudes to the beam, not forgetting that nails should be under the plinth.