The plaster layer on any surface is obtained as a result of three operations: applying a spray, soil and a corrupt layer.
Want to install PVC windows in Moscow? We advise you to install VEKA windows in Moscow at competitive prices under the link.
Spray. The surface should be well mixed so that the moisture from the solution does not absorb under the plastering. Then on the entire surface, especially thoroughly on irregularities, cracks, is applied with a layer of more liquid consistency.
The spray layer can be on a tree not more than 9 mm, on concrete and stone surfaces, bricks – no more than 5 mm. It must cover the entire surface completely, including duncar.
After grappling the first layer, you must go to the second stage – applying the soil. Layer thickness with lime-gypsum solutions -7 mm, with cement – at least 5 mm. Each layer of plastering should be aligned, but not immediately, and after the solution clings. Apply for this Best Wooden Halfury.
The soil is applied in several layers, if necessary.
Final stage – applying the corrupt layer. It is proceeded. When the last layer of soil turns. The thickness of the stacked layer is not more than 2 mm for plaster ordinary and for decorative – twice as much.
After hardening the last layer, it is watched, evenly wetting with water, wooden graters or special throat machines.