If the basement in the house is absent, it makes sense to make wooden floors with pillars support. Depending on the height and load, the support pillars are made of wood, brick or concrete. Supports are installed in the wells, at the bottom of which a cruise and sand pillow. Pitch supports usually should not be more than one meter. The “Binding” pillars of the support is performed along the upper horizontal, which creates a plane for the construction of a rough floor in a wooden house. Going to the following link you can purchase Pestovo Houses from Bruz at competitive prices.
If there is a basement in a wooden house, then the spans between the pillars are increasing. To strengthen the structures produce auxiliary metal or concrete jumpers; With this purpose, you can fasten the boards to get a foreign or brand section, which helps to carry large loads.
Before installing in the supports of the lags, the regteroids in several layers are placed on the poles, which protect the boards of lag from humidity. In general, lags are peculiar support for the entire floor in the house, directly on them first stacked the draft, and then the finishing floor in a wooden house. It must be remembered that when laying lags, you can achieve the horizontal of the future floor, which are necessary for adjustment and are performed by installing gaskets and wedges.