Supporting the tension ceiling will serve a hard frame of profile rail. Before mounting it, using the water level, it is necessary to determine the angle that is located below, which is located below, and put the mark at a distance of 2 cm from the corner. By the same principle you need to decide with zero level. Now, with the help of special folding transport, the balcony angles should be measured, after which the nail dowels to attach the profile rail to each wall.
Want to learn more about bets on deposits Novosibirsk? Then we advise you to visit our website and have all the information you are interested in.
Next you need to make a fastening of the film. Mounting begins with a base angle with the transition to the opposite corner diagonally and so all the angles. After that, helping the spatula, you need to fix the side sides of the film, heading from the corners to the center. Attach the PVC film in two ways:
– With the help of harpunov stipulated at the end of the film. In this case, an aluminum profile is applied; – With the help of wooden staps. For this method, the use of P-shaped aluminum profile and wooden staps, which clamp PVC film. Available fastening elements on the ceiling can be hidden by decorative plugs, and in the completion of the process of installing lamps.