Facade plaster

Such plaster is well suited to align the walls. Which were made of concrete or brick. Also allege the ceilings. Still plastered various facades. And on top are stones with tiles. The basis that will be placed, it is necessary to clean from past paint and dirty areas. Moisten all water. If the surface absorbs very quickly, then process it with primer. Temperature Approximate base may be from plus five to plus thirty. Dry mix mix with water. One fifth liter of water for one kilogram mixture. All mix the drill to get a homogeneous mass. Now very often on the Internet you can meet the announcement similar to this selling corn, and it is popular. Wait about seven minutes. And re-all mix. Now about two o’clock the solution can be applied, but it should be stirred. So as not hardening the solution. To apply this mixture to lay ten – twenty millimeters. It can be made with a spatula from the bottom up. Then everything should be dissolved, so that the surface remained smooth, and not from the hubbai. The next layer is applied only when the first dry. So that faster dried up, ensure excellent ventilation. Approximately the solution solidifies during the day. Gray mixture color. Be careful, it is impossible to get into your eyes in your eyes.