Whatever type of floor covering you have not chosen during repair, you will always need to prepare the surface. This is especially true for new homes, where the draft gender is more often irregularities with pieces of sticking fittings, and level drops reach 8-10 cm. To align the surface, you need to make a light tie. First of all, in the room where the floor will be aligned, you need to take care. Clean the surface from the garbage and stubble. No screed sticks to a dry surface. Remember this. Then determine the thickness of the future screed. To do this, use the level (laser or water) and determine the zero level. After the repair remains a lot of construction debris, and experts recommend visit the UCLEAN website and use cleaning services.
At the next stage you need to install beacons. Do not strive to establish them too often, it can lead to wave formation. The lighting frequency of beacons should be 10-12 cm differ from the length of your rule. The most responsible stage of the process behind. It will only be necessary to knead the cement mortar and fill the space between the beacons. Excess the mixture should be removed by the rule, at the same time prevent the formation of unfilled areas. Until complete drying, the screed must pass about two weeks, you can walk on it throughout.